Wednesday, February 10, 2021

Boat Repairs Completed and Why Are We Here?

 I am sitting here in SHIFT in the Gulfport Marina on a rainy, but warm day. It is very cold up north with high temperatures below freezing. We are very comfortable here with temperatures in the mid 60's. It was about 75 yesterday and sunny. I should have been out sailing, but yesterday was the big day. We have been waiting over three weeks for this day. This was the day our new holding tank was to arrive!

 It has been three weeks without a functional head on the boat. We have enjoyed our evening walks to the marina bathrooms, but it was time to get the boat ready for cruising again. 

I started the day by walking the 1.5 miles to the local marine store. Ken's is a local chandlery that is a candy store for a mariner. I enjoyed walking around and checking out all they had and now know if I need anything while I am here, this is the place to go. I bought what I thought I needed for the installation of the new tank and then walked back to the marina. Just as I arrived at the office, the UPS truck pulled up and had the tank. That was a great start!

I got the tank back to the boat in a dock cart and then as boat projects go, I found that the fittings I had, would not work, so back to Ken's to get the right ones. 

I spent the next two hours doing boat yoga. Getting by body into the correct position to reach the hose clamp or bolt that needed to be tightened. I have to say that even after the rough start, all went well. We then tested with fresh water and there were no leaks. Yeah!!

Here is a shot of the new tank installed. The poly tank should last much longer than the previous aluminum tanks. 

That is one major project completed. I have spent the past few weeks doing a number of other projects on the boat. I have been doing some reading about my engine and found that the valves should be adjusted every 500 hours. I had no idea when they had last been done, so I went after that project. All was going well until I had to move a coolant hose out of the way to remove the valve cover. The hose broke getting coolant all over the place. The hose was old and it obviously needed to be replaced. It was good that I found this problem while we were here at the dock with my truck ready to take me to the parts store, rather than out on the open water. It was still an unplanned part of the project. It seems all boat projects have those unplanned parts. The good news is the valve adjustment was very similar to the valves on my KTM motorcycles, so I knew exactly how to do it. I found that both the intake and exhaust on #3 were out of adjustment. I completed the adjustment and then put it back together and it seems to be running great. We will see how she runs under load on our next outing. 

This past weekend we had a beautiful day, so I decided an outside project was in order. I know you should clean and lubricate your winches about once a year. We have 7 of them on the boat. We use three of them each time we sail and the others are rarely used. I decided to rebuild all three of them. The project took me about 6 hours, but I was very happy with the result. They do work much smoother, but the best part is that I did not drop any parts or tools in the water. 

This is a picture of one of our Lewmar 16 self tailing winches. This one is used to raise the Mainsail. You can kind of see one of our Lewmar 43's in the background that is used to manage our Genoa sheet. 

I do believe that it is important to do your own maintenance and upkeep if you plan to be an offshore sailor. First, you know the job was done correctly and second you need to know and understand all of the systems on your boat. I get a great deal of satisfaction getting these jobs done and find it an enjoyable part of this lifestyle. 

 I have been asked, why are you staying in Gulfport, Mississippi? Well, the answer is a combination of many things. 

When our plans to go to the Bahamas changed due to the hassles of travel in COVID times, we started thinking about where we could go this winter. We were going to be in the Mobile, Alabama area after coming back down the river. Sailing to Florida is what most boats do to get to warmer weather. We thought about that, but we learned last year that winters in south Florida mean high costs for marinas and plenty of other boats. Staying on the hook is ok, but you will see plenty of passing storms with strong north winds. That makes for sleepless nights watching the anchor. We thought we would like to try some time in a marina along the gulf coast that will give us good protection from the north and easy access to water and electricity. The cost of the Gulfport Municipal Marina is less than half of most marinas in south Florida and one third of a marina in the Keys. Going back to Boot Key Harbor was on option. We loved it there, but we like to try new things and go to new places. 

We have seen some cool weather here in Gulfport, but there have been plenty of nice days mixed in. Sailing out of this marina is easy. You only have to motor about a quarter mile to get to open water, where you can put up the sails and then head out into Mississippi sound. That is the other thing we like, the open water just outside the jetty's is not the open gulf. There are a line of barrier islands that start off Louisiana and go all the way to Florida. These create the sound and reduce wave action significantly while still not interrupting the wind currents. So, we have the wind without the waves. That makes for some very pleasant sailing.  We have been told that March and April is a great time to visit the islands and stay on anchor. We will hold on to our slip in the marina because it is cheaper by the month and then just come back here when bad weather is approaching. So far, we really like Gulfport.

One nice thing about this marina is there are a few liveaboards here. They have been great. We spent the evening getting to know Bill and Annie last night. There is nothing better than sharing sea stories and talking about future plans. 

  I will finish this entry with one of my favorite things. We get to enjoy some amazing sunsets on the water. A few nights ago we had a special one. Enjoy!






4 comments:

  1. Great job on the holding tank, it is always rewarding when you are able to complete your own repairs and save a few bucks! In addition to the lower cost and calmer weather I bet an added bonus is cheaper shrimp and other seafood!

    ReplyDelete
    Replies
    1. I did forget to point out the low host/high quality seafood here on the gulf coast.

      Delete
  2. Great to get all those repairs done. Beautiful sunsets!

    ReplyDelete